GPI A109GMN100NA1 1" Nylon Battery Powered Flow Meter

The A1 Nylon Flow Meter line are used with water, mild-chemicals and other fluids. The lithium battery powered electronic display A1 Nylon flow meters are calibrated to read in gallons and liters per minute with two visible display totals in which case one is resettable and the other gives you a cumulative flow total. This one-inch model has a flow rate of 3 to 50 GPM.

This item is used and need to change the battery on the display

Box is not included

What you see is what you get

    Design Type: Turbine

Housing Material: Nylon

Fitting Type: NPT

Turbine Size: 1 Inch

Flow Range: 3 to 50 GPM ; 11 to 190 LPM

Accuracy (% of Reading - Turbine with Computer): ± 1.5%

Repeatability: ± 0.2%

Pressure Rating: 150 psi ; 10.2 bar

Operating Temperature Range: -40 to 250 ºF ; -40 to 121 ºC

Operating Temperature Range with Computer: 0 to 140 ºF ;-18 to 60 ºC

Typical K-Factor: 730

Wetted Material Housing: Nylon

Wetted Material Bearings: Ceramic

Wetted Material Shaft: Tungsten Carbide

Wetted Material Rotor: Nylon

Wetted Material Rings: 316 Stainless Steel

Wetted Material Signal Generator: Ferrite

Frequency Range: 11 to 110 Hz at 0.3 to 3 GPM

Recommended Strainer Size: 28 mesh

Shipping Weight: 1.35 lbs ; 0.61 kg

Reads: Gallons ; Litres

Electronic Choice: 09 - 2 Totals (1 Resettable/ 1 Cumulative), Factory Calibration in Gallons and Litres, 2 User Calibrations and Flowrate
Power Supply     Two Lithium Batteries
Manufacturer     GPI
MPN     A109GMN100NA1
Manufacturer Warranty     1 Year
Mitchell Catalog Number     9lmig2, 8rmig2, 7rmig2
Customer reviews